Post Pictures of Your Rims

[MichaelRalliart]

Post Some Pics of your rims, So everybody can see! :D

[KyleKitchen]

............................No.

[ChaseRalli]

............................No.

uncalled for.

and i would post some pics but i dont think you guys would like to see the stock rims lol!!

[BravoZero]

............................No.

This is a legitimate "show and shine" thread, so no need for that kind of attitude. If you don't want to post pictures, don't post anything at all.

On that note, I also have stock wheels. I don't plan on getting any wheels until these stock Yoko's have bit the dust, then I'll be getting both tires and wheels at the same time.

[EricS09RA]

http://i762.photobucket.com/albums/xx264/eshaeffer/wheels/fuddruckers.jpg

[pbassist12]

Does anyone want to see my stock rims in black or no? lol

[KyleKitchen]

Hahaha hes my best friend. Im just messing with him. No harm done. =)
Id like to see everyones rims as well, for future reference. Ive just got the stockies painted black.

[Jackal]

To tell you the truth I have never seen our stock wheels done in black so Yes Please!

[Blaze]

ADVAN RS - Evolution
VOLK CE28Ns - Ralliart
http://www.socalevo.net/gallery/albums/userpics/10569/normal_IMG_9397.JPG

Enkei RPM2s
http://www.socalevo.net/gallery/albums/userpics/10569/normal_36699_412443304451_720529451_4241890_757308 3_n.jpg

BBS: Evolution MR
http://www.socalevo.net/gallery/albums/userpics/10569/normal_Picture%20024~0.jpg

[Cesarn2928]

my baby
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc4/163063_1674686340292_1031434899_31836876_499237_n. jpg

[frylock]

Weds SA-55M 18x9+20 on cooper 225/40
http://i8.photobucket.com/albums/a35/409-EF8/2011-03-12_17-20-16_315.jpg

[pbassist12]

Before
http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-14140653.jpg

During
http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-14174827.jpg

After
http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-16125835.jpg


Preview!
http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-14175532.jpg

[BravoZero]

Not too bad! I've seen stock wheels on different cars painted and it looks like crap, but the GTS/Ralliart wheels look good painted.

[RG-RA]

ark design r8
before black powder coat
http://i1230.photobucket.com/albums/ee482/shannonwilhelm1988/vehicles/IMG00339-20101103-1826.jpg
and after
http://i1230.photobucket.com/albums/ee482/shannonwilhelm1988/vehicles/IMAG0100.jpg
http://i1230.photobucket.com/albums/ee482/shannonwilhelm1988/vehicles/DSCN0045.jpg

[pbassist12]

Not too bad! I've seen stock wheels on different cars painted and it looks like crap, but the GTS/Ralliart wheels look good painted.

yeah i mean a paint job is a paint job, but i would rather just spend the 15 bucks than get a powder coat cause down the road im going to buy rims so save my money

[gaspipedreamer]

Before
http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-14140653.jpg

During
http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-14174827.jpg

After
http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-16125835.jpg


Preview!
http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-14175532.jpg


How many coats did you have to do?? I want to black mine out too and how many cans did you go through?

[pbassist12]

I did like 4 coats, my first one was really shitty so i think i did 5 in total. I bought 3 cans of plasti dip and used two but i still have half left on the 3rd one. Two cans should be fine but i bought a 3rd cause i wanted to touch up some spots, plus it doesnt hurt to make it look nice. The hardest part is getting the side of the spokes, thats what i used the 3rd can for

[gaspipedreamer]

I did like 4 coats, my first one was really shitty so i think i did 5 in total. I bought 3 cans of plasti dip and used two but i still have half left on the 3rd one. Two cans should be fine but i bought a 3rd cause i wanted to touch up some spots, plus it doesnt hurt to make it look nice. The hardest part is getting the side of the spokes, thats what i used the 3rd can for

Oh ok thanks for the info, and also how is it holding up so far?

[Cesarn2928]

Not too bad! I've seen stock wheels on different cars painted and it looks like crap, but the GTS/Ralliart wheels look good painted.

my friend got them Black (GLoss) with a Red lip... looks sick! :D

[EricS09RA]

my friend got them Black (GLoss) with a Red lip... looks sick! :D

dont forget Adrian, he got black with color matched Rotor Glow lip. Both were done by powder coating...came out real nice!!!!

[MichaelRalliart]

http://i762.photobucket.com/albums/xx264/eshaeffer/wheels/fuddruckers.jpg

What rims are those man? and the specs

[frylock]

Look like "rota" grids 18x8.5 +40ish maybe less

[EricS09RA]

What rims are those man? and the specs

Rota Grids 18x8.5 +44

[frylock]

Rota Grids 18x8.5 +44
I was close lol

[caRalliArt]

what mods need to be done in order to mount those rota grid wheels on a lowered ralliart?Will they fit with just fender rolling?

[pbassist12]

Oh ok thanks for the info, and also how is it holding up so far?

well i just painted them within the week and im putting them on tomorrow, im sure they will hold up fine, it always depends on the driver. If your gonna drive around and hit shit then obviously it wont but ill keep you updated!

[OVNI]

Ralliart with Rota Torque 18x8.5 48+
828

829

830

and my new toy... 2010 EVO X GSR:D
831
832

[OVNI]

Ralliart with Rota Torque 18x8.5 48+
and my new toy... 2010 EVO X GSR:D


Two babies...:D

[EricS09RA]

what mods need to be done in order to mount those rota grid wheels on a lowered ralliart?Will they fit with just fender rolling?

I'm lowered on Eibach Sportlines and the tires are 225/40's.

No mods necessary. I have had no rubbing whatsoever. Even with three full sized passengers plus me, no issues. I'm gonna try 235's next and see if it remains trouble free.

[kenpora]

my baby
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc4/163063_1674686340292_1031434899_31836876_499237_n. jpg

I like those! Nice picture!

[pbassist12]

http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-19153246.jpg

finally put my summers on, this is how it looks!

[susafuss]

http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-19153246.jpg

finally put my summers on, this is how it looks!

ok after seeing that i am so painting my stockers lol

[kenshin1015]

Do mr rims fit on ralliarts?

[ralliartSAT]

http://i239.photobucket.com/albums/ff111/hollisterpolak/2011-03-19153246.jpg

finally put my summers on, this is how it looks!

Dam that looks clean bro. I so can't wait to do mine now haha.

[EricS09RA]

Do mr rims fit on ralliarts?

I think they require fender rolling

[pbassist12]

Thanks!

For 15 bucks, the rims look great
Im gonna buy new ones down the road so they are going to be temp

[MikeW-RRE]

Been through a few different wheels. I’m a sucker for free wheels. Got a big hammer, I’ll make ‘em fit.

Slammed bottomed out suspension on stock wheels :-P

http://roadraceengineering.com/ralliart/tech/rre-ralliart/stock/slammed.jpg

Rays G-Games 8.5x19

http://roadraceengineering.com/ralliart/parts/progress/lowered-rays-side.JPG

http://roadraceengineering.com/ralliart/parts/progress/lowered-rays-frontqtr.JPG

Enkei NT03+M 9.5x17

http://roadraceengineering.com/rre/racepics/rta-cali-5-10/800/rossy-goodluck.jpg



Mike W

[MikeW-RRE]

Currently on these:

Volk RE30s 9.5x18:

http://roadraceengineering.com/ralliart/rre_project_car/volks.jpg

[gaspipedreamer]

Those are all sexy o.O

[evil03]

http://clubralliart.com/attachment.php?attachmentid=858&stc=1&d=1301073804

[caRalliArt]

Hey mike just curious what suspension your using. R your struts blown.I'm on teins and I thought they had the lowest stance.but I'm no where near as low as you.yours looks really nice

[BravoZero]

Hey mike just curious what suspension your using. R your struts blown.I'm on teins and I thought they had the lowest stance.but I'm no where near as low as you.yours looks really nice

He might be on coilovers rather than just lowering springs.

[gaspipedreamer]

http://clubralliart.com/attachment.php?attachmentid=858&stc=1&d=1301073804

whoa thats sexy whats the set up?

[evil03]

whoa thats sexy whats the set up?


18x9.5+20 on custom coilovers slammed!!! lol.... i am on bump stop on the rears and about 1" form the bump stops on the front...

[BravoZero]

18x9.5+20 on custom coilovers slammed!!! lol.... i am on bump stop on the rears and about 1" form the bump stops on the front...

Which coilovers did you have installed?

[evil03]

custom built apexi one off production

[jalacey85]

Anyone know of any ralliarts with 19's and what kinda specs it would take? I realize ill prob at least have to roll my backs. My plan at the moment are some 19's with a small drop.

[Mkid]

Yeah, I'm actually surprised more people don't go with 19s.

[EricS09RA]

I knew a guy running 19's on a custom eibach set-up. not sure what the wheel dimensions were.

[evil03]

Anyone know of any ralliarts with 19's and what kinda specs it would take? I realize ill prob at least have to roll my backs. My plan at the moment are some 19's with a small drop.

i was on 19s lol

19x9.5+20 slammed and stretched 225 35 19

[Jackal]

Got my Evo X GSR rims on just gotta find a place to roll my fenders.

http://i1198.photobucket.com/albums/aa442/Jack_Loftus/EvoRimson.jpg

[BravoZero]

Nice! Pic is too small though.

[pogiboiuno]

Here are mine :) 18x8.5 +35 Axis Halo's

http://29.media.tumblr.com/tumblr_liutew2t481qag99fo1_500.jpg

[Mkid]

damn dude, that looks nice. Where did you get the fender vent?

[BeeGee]

Here's my summer wheels - 18 x 8. Just installed yesterday.

[pogiboiuno]

damn dude, that looks nice. Where did you get the fender vent?

thanks man. got the vents from a GSR guy. He got the paint matched vents that are stock on the MR so he sold em to me for $20. not bad. OEM ftw!! lol and I just cut off the clips in the back so it would have a flat surface, and just used double sided 3m tape.

[joselito329]

OZ Superturismo 18x8

[chazyronnie]

Here are mine :) 18x8.5 +35 Axis Halo's

http://29.media.tumblr.com/tumblr_liutew2t481qag99fo1_500.jpg

here's mine
http://img52.imageshack.us/img52/6933/photopf.jpg (http://img52.imageshack.us/i/photopf.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[BravoZero]

here's mine
http://img52.imageshack.us/img52/6933/photopf.jpg (http://img52.imageshack.us/i/photopf.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

What exhaust is that?

[Blaze]

:D Since we're on the subject....

http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/c937c3c2.jpg

[chazyronnie]

What exhaust is that?

Dc sports catback exhaust

[Ralliart26]

http://i1142.photobucket.com/albums/n604/theNEWB311/RalliArt/DSC00067.jpg

A little dirty... but I thought I'd participate :p

[Ralliart23]

Been through a few different wheels. I’m a sucker for free wheels. Got a big hammer, I’ll make ‘em fit.

Slammed bottomed out suspension on stock wheels :-P

http://roadraceengineering.com/ralliart/tech/rre-ralliart/stock/slammed.jpg

Rays G-Games 8.5x19

http://roadraceengineering.com/ralliart/parts/progress/lowered-rays-side.JPG

http://roadraceengineering.com/ralliart/parts/progress/lowered-rays-frontqtr.JPG

Enkei NT03+M 9.5x17

http://roadraceengineering.com/rre/racepics/rta-cali-5-10/800/rossy-goodluck.jpg



Mike W

whats the offset on the ggames mike?

[GAbOS]

What offset and tires on the Enkei!

[Cesarn2928]

:D Since we're on the subject....

http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/c937c3c2.jpg

wher u get those CF fenders

[Blaze]

What offset and tires on the Enkei!

On my Enkei RPM2s, the wheels are 18x9 +35.
The tires are 265/35/18s.

These WILL NOT fit on a stock RA, rolled or otherwise.

wher u get those CF fenders

The fenders are by Seibon. A 1/2" boarder was left around the vent to accent the CF and give the vent the appearance of being slightly larger. I don't recommend Seibon at all. Fitment is time consuming and the end result is moderate to good at best. Sometimes you can get lucky though. These fenders were for an Evo X and required some cutting and re-drilling to fit. Also required is an Evo X front bumper....

Blaze

[GAbOS]

Just ordered +35 17x8's and going with 245/45 on OEM suspension.

TSW Nurburgrin in matte black.

[Jackal]

Got a better shot of my car with Evo X GSR rims on.

http://i1198.photobucket.com/albums/aa442/Jack_Loftus/JacksRalliartwithEvoXRims.jpg

[MTZL]

GSR rims! Looking good Jack!
So you finally got the fender rolling situation taken care of?
Ralliart Badge on the fender! :cool::D

[Exyia]

Got a better shot of my car with Evo X GSR rims on.

http://i1198.photobucket.com/albums/aa442/Jack_Loftus/JacksRalliartwithEvoXRims.jpg

2 things...

1. I actually like that Ralliart badge. It looks like we can take out the side markers and cover it with that - and then we'll have a more clean looking RA badge like M3's and AMGs. Where did you get it?

2. This is probably the first time I've seen GSR rims on an RA that I like. I don't know why, but this might have sold me to just get a used GSR set of wheels/tires for much less than RPF1's when I upgrade

gj :)

[Tuqwik4u]

Evo 8 Enkies 235's ...

[Jackal]

2 things...

1. I actually like that Ralliart badge. It looks like we can take out the side markers and cover it with that - and then we'll have a more clean looking RA badge like M3's and AMGs. Where did you get it?

2. This is probably the first time I've seen GSR rims on an RA that I like. I don't know why, but this might have sold me to just get a used GSR set of wheels/tires for much less than RPF1's when I upgrade

gj :)



No I currently have switched back to the stock rims while I wait fo the fender rolling tool to be shipped. So I still have to roll fenders but could not afford the proper one at $250.00 got the smaller hand tool from Eastwood company through ebay for 36.99.

Yes I like the look of the badge but not necessarily the quality. Will see how many car washes they survive. I would never remove the side markers as I want to be seen on the road. LOL ! Just think old people.

I picked up my rims for 500 bucks and they came with used stock tires on them complete with the pressure sensors.

I had a young man at a red light ask me why I would put Ralliart stickers on my Evo X. I replied I don't have an Evo X, he wasn't convinced LOL !

[chazyronnie]

http://img163.imageshack.us/img163/6942/ra1f.jpg (http://img163.imageshack.us/i/ra1f.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
http://img861.imageshack.us/img861/7246/ws3.jpg (http://img861.imageshack.us/i/ws3.jpg/)

Uploaded with ImageShack.us (http://imageshack.us):)

[BravoZero]

http://img163.imageshack.us/img163/6942/ra1f.jpg (http://img163.imageshack.us/i/ra1f.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
http://img861.imageshack.us/img861/7246/ws3.jpg (http://img861.imageshack.us/i/ws3.jpg/)

Uploaded with ImageShack.us (http://imageshack.us):)

What size tires are mounted on those wheels?

[Ralliart26]

What size tires are mounted on those wheels?

Yeah that! and info on your fender vent, looks like stock ralliart fenders... Looks really good!

[chazyronnie]

245/40R18 hankook ventus evo v12

[Tuqwik4u]

No I currently have switched back to the stock rims while I wait fo the fender rolling tool to be shipped. So I still have to roll fenders but could not afford the proper one at $250.00 got the smaller hand tool from Eastwood company through ebay for 36.99.

Yes I like the look of the badge but not necessarily the quality. Will see how many car washes they survive. I would never remove the side markers as I want to be seen on the road. LOL ! Just think old people.

I picked up my rims for 500 bucks and they came with used stock tires on them complete with the pressure sensors.

I had a young man at a red light ask me why I would put Ralliart stickers on my Evo X. I replied I don't have an Evo X, he wasn't convinced LOL !

Hey Jackal, Great choice on the X wheels, I think they will look even better in white. What u.think?

[RalliArtist]

I had a young man at a red light ask me why I would put Ralliart stickers on my Evo X. I replied I don't have an Evo X, he wasn't convinced LOL !

Well Ralliart is/was Mitsubishis performance division just like AMG, TRD, NISMO, MUGEN, etc so you can technically put a RA emblem on any mitsu.

His automotive ignorance would have made my blood boil.

[GAbOS]

Mine came in. Low light as the sun just had dropped over the Sierras. More soon.

Little too much track for my taste. Thinking of trading back out now.

http://screens.fmmotorsports.com/gab/ralliart/ralliart_nodump.jpg

[BravoZero]

Mine came in. Low light as the sun just had dropped over the Sierras. More soon.

Little too much track for my taste. Thinking of trading back out now.

http://screens.fmmotorsports.com/gab/ralliart/ralliart_nodump.jpg

Which wheels are those?

[GAbOS]

TSW Nurburgring 17x8 +35 wrapped in 245/45

[GAbOS]

The rears are rubbing :(

Left the winter wheels/tires in the rear seats to add some weight to test with today while driving around. Hit the on ramp this morning on the way into work and heard the sound I was dreading. ugh

[BravoZero]

Are you lowered? Did you roll the rear fenders?

[GAbOS]

Stock height and I have not rolled them; yet!

[BravoZero]

Git R Done!

[GAbOS]

Have an appointment for next Tuesday to roll the rear. $75

http://screens.fmmotorsports.com/gab/ralliart/ralliart_wheels01.jpg

http://screens.fmmotorsports.com/gab/ralliart/ralliart_wheels02.jpg

[Mkid]

18X8 +35 Konig Lightning

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/218044_10150153410334355_508514354_6669793_7046946 _n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/221628_10150153408319355_508514354_6669749_3816323 _n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216298_10150153416119355_508514354_6669812_1446228 _n.jpg

[eRocKiiN]

http://clubralliart.com/attachment.php?attachmentid=858&stc=1&d=1301073804

OMG PURE SEXXX!!!! Thanks for my new phone background BTW!! (Girlfriend isn't not too happy she got the boot lol :D)

[initial_d2k]

my little contribution:
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash2/71763_10150269561500136_510410135_15139591_3254592 _n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash1/24980_10150154150065136_510410135_12109405_6043_n. jpg

[wwralliart77]

http://clubralliart.com/attachment.php?attachmentid=858&stc=1&d=1301073804

What was required to run this particular setup? From what I can tell you had your fenders rolled. Did you have to pull out the rears? I am also on coilovers and was curious to see if I could achieve something similar as far as width of wheels.

[gaspipedreamer]

Is $200 a fair price to powder coat a set of wheels?

[wwralliart77]

Is $200 a fair price to powder coat a set of wheels?

Hell yes it is!!! :D Cheapest I was ever quoted was $400 and that was for flat black.

[gaspipedreamer]

Hell yes it is!!! :D Cheapest I was ever quoted was $400 and that was for flat black.

Holy crap 400 bills here I am thinking im getting ripped off lol. I can give you the address of the place since you are in so cal.

[GAbOS]

Got the rears rolled today ever so slightly. He mentioned he barely had to do much at all as I was right on the edge. He is an AutoX driver in my region and took it through its paces for me to be sure. Of course, so did I once I got my hands on it. :)

No rubbing at all in extreme situations on the 245's at +35 at stock height. I plan on getting pictures this weekend with it being nice out.

[jRox]

What was required to run this particular setup? From what I can tell you had your fenders rolled. Did you have to pull out the rears? I am also on coilovers and was curious to see if I could achieve something similar as far as width of wheels.

Stretched tires, negative camber, and lots of fender work (pull/flare/etc).

[wwralliart77]

Stretched tires, negative camber, and lots of fender work (pull/flare/etc).

I figured it would come to that.

[Cesarn2928]

http://clubralliart.com/attachment.php?attachmentid=858&stc=1&d=1301073804

WHAT I WANNA KNO IS WHERE DID U GET THAT SEXXY LIP!! :( beeen lookin for one!! is it CF?

[wwralliart77]

WHAT I WANNA KNO IS WHERE DID U GET THAT SEXXY LIP!! :( beeen lookin for one!! is it CF?

That's the lip that PVR Motorsports was doing the group buy on. It's made by Evosoul I believe. Available in dry carbon, wet carbon, and fiberglass.

[Racegirl]

Hello,

Here is my 09 Ralliart with Matte Bronze Rota Grids 18x8.5x44 with VMS orange tuner lug nuts and 245x40x18 Advans with 1.24 degree of camber in the rear NO rubbing issues and NO fender rolling needed.

I'm taking the car out tomorrow for more professional photo shots I'll post more later.

Thanks,
Racegirl

[ChaseRalli]

Hello,

Here is my 09 Ralliart with Matte Bronze Rota Grids 18x8.5x44 with VMS orange tuner lug nuts and 245x40x18 Advans with 1.24 degree of camber in the rear NO rubbing issues and NO fender rolling needed.

I'm taking the car out tomorrow for more professional photo shots I'll post more later.

Thanks,
Racegirl

sexy ass car my friend.

[ChaseRalli]

http://clubralliart.com/attachment.php?attachmentid=858&stc=1&d=1301073804

which roof rack is that and where can i get one....

and that is one of the nicest ralliarts ive seen

[RalliArtist]

My friend with a '11 GSR just bought another set of rims (this will be his third set). So he asked if i wanted to buy his old rims. The rims are 18x9 Motegi MR122 with 225/35 tires for $600. He's done plenty of donuts with those wheels so i'm gonna try to get him down to $500 What do you guys think? Should i go for it?

http://www.wheelfire.com/imagesproducts/MR122SatinBlack1.jpg

http://i64.photobucket.com/albums/h199/gba2001/Japanese%20Love/100_0882.jpg

my car and his
http://i64.photobucket.com/albums/h199/gba2001/Japanese%20Love/100_0896.jpg

[EricS09RA]

Depends on what kinda shape they're in.

[Mkid]

any offset info?

[RalliArtist]

any offset info?

they're either +35 or +45. i'll have to find out

[Mkid]

if its from an evo I'm gonna guess +35

If thats the case, they are gonna poke a bit and will rub if your lowered and don't have rolled fenders.

[RalliArtist]

if its from an evo I'm gonna guess +35

If thats the case, they are gonna poke a bit and will rub if your lowered and don't have rolled fenders.

My friend is lowered 2.2" all around, has 5mm spacers and his fenders arent rolled and doesn't rub. I'm at stock height but don't plan on lowering.

[Mkid]

If your friend is on stock wheels, they are +46 offset and only 7" wide. Even if you don't take the width into consideration, a 5mm spacer would only emulate a +41 offset, that would mean he'd need a whole nother spacer to get to +35. add in addition the wheels are 2 inches wider and you've got yourself poke.

[RalliArtist]

we're gonna test fit them tomorrow n see what happens.

[Mkid]

Yeah, I'm not saying don't go for it, some people like the poked look, and if you aren't lowered, you should be fine unless you hit a huge pothole or something but then i think fender rub would be the least of your concerns.

[pogiboiuno]

I'm on 18x8.5 +35 and they dont poke out that much. If you put 215s for tires, you wont have to roll fenders. Its just a little bit of stretch though. For my next set of tires, I'm going to get 235s or 245s and then for sure I'm gunna get my fenders rolled. I'm dropped on Progress springs.

[Ralliart23]

here are mine 18x9.5 38 offset xxr 522 wrapped in 235/40/18 falken fk452

http://i1187.photobucket.com/albums/z390/samsimurda/IMG_9015.jpg

http://i1187.photobucket.com/albums/z390/samsimurda/IMG_9012.jpg

http://i1187.photobucket.com/albums/z390/samsimurda/IMG_8997.jpg

http://i1187.photobucket.com/albums/z390/samsimurda/IMG_8995.jpg

[Ralliart23]

http://i1187.photobucket.com/albums/z390/samsimurda/IMG_8996.jpg

http://i1187.photobucket.com/albums/z390/samsimurda/IMG_8998.jpg

[BravoZero]

^ Nice, that looks beast! Wheel specs?

[RalliMark]

ralliart23 whered u get those wheels? I might get them in gold.

[Ralliart23]

i got them from my local shop in toronto, but its better if you live in the us, you can get them from nextlevelmotoring online and they are really cheap, ship for cheap, and they have all the sizes and colors. they are also a special dealer for xxr so they have colors that other dealers dont in the 522's like bronze.

here is the page

http://www.nlmotoring.com/XXR-522-Wheels-s/1522.htm

hope this helps

[RalliMark]

Wow those are cheap thanks man I love the look and Id rather have bronze on my rg then gold. Id guess u have ur fenders rolled with those wheel and tire combo lowered.

[EricS09RA]

Wow those are cheap thanks man I love the look and Id rather have bronze on my rg then gold. Id guess u have ur fenders rolled with those wheel and tire combo lowered.

What u got against gold on rg? :p

[BravoZero]

What u got against gold on rg? :p

Lol...

Hey Eric, what is your suspension setup to go along with those wheels/tires? Are your fenders rolled at all?

[RalliMark]

What u got against gold on rg? :p

Nothing at all I guess just my taste. Post some pics maybe Ill like gold instead.

[EricS09RA]

Lol...

Hey Eric, what is your suspension setup to go along with those wheels/tires? Are your fenders rolled at all?

Springs are Eibach sportlines, wheels are 18x8.5+44, tires are 225/40. No fender rolling necessary for this set up. I wanna go 245/40, probably gonna have to roll fenders to fit the wider tire.

[EricS09RA]

Nothing at all I guess just my taste. Post some pics maybe Ill like gold instead.

http://i762.photobucket.com/albums/xx264/eshaeffer/Sawgrass%20Mills/sawgrass12.jpg

http://i762.photobucket.com/albums/xx264/eshaeffer/Sawgrass%20Mills/sawgrass11.jpg

http://i762.photobucket.com/albums/xx264/eshaeffer/Sawgrass%20Mills/sawgrass3.jpg

[BravoZero]

Springs are Eibach sportlines, wheels are 18x8.5+44, tires are 225/40. No fender rolling necessary for this set up. I wanna go 245/40, probably gonna have to roll fenders to fit the wider tire.

I plan on going with the 18x8.5 +44 wheels as well, and either 235 or 245 tires. Havent' decided yet, I guess the determining factor will be fender rolling requirements. But I'll be on Swift springs, so I might be able to get away with 245's and no rolling since it will sit higher.

[RalliMark]

http://i762.photobucket.com/albums/xx264/eshaeffer/Sawgrass%20Mills/sawgrass12.jpg

http://i762.photobucket.com/albums/xx264/eshaeffer/Sawgrass%20Mills/sawgrass11.jpg

http://i762.photobucket.com/albums/xx264/eshaeffer/Sawgrass%20Mills/sawgrass3.jpg

LOL I actually like ur wheels alot I think I was considering buying those from u if I remember correctly. I just dont have the cash for right now.

[EricS09RA]

http://i762.photobucket.com/albums/xx264/eshaeffer/fuck.jpg

:mad:

[MTZL]

^oUCH! what happened???
What kinda rim is that???

[EricS09RA]

^oUCH! what happened???
What kinda rim is that???

ran over a curb at about 15-20 mph

Rota Grid

[BravoZero]

Damn dude! That sucks... any other damage to the car?

[EricS09RA]

Scraped up the bottom of the front bumper. It kinda knocked it out of place, but it popped right back with a little push. Scraped up the bottom of the side skirt. It started separating at the rear, I used a c clamp to push it back. Left it overnight and it seems to be staying in place. Got a small dent and scuff on the rear wheel.

[BravoZero]

Sorry to hear that bro. Any of the cosmetic damage clearly visible from just standing near the car or is all hidden beneath? If so maybe it won't be as bad if you can't see it, or a majority of it anyway.

[EricS09RA]

the scraping isn't really visible unless you're looking for it. The front is slightly visible when standing up, but again, you have to be looking for it.

The side skirt isn't visible at all unless you crouch. It is starting to seperate slightly at the rear again (probably an 1/8th inch gap between the skirt and the body). I'm gonna try using some super glue and a c clamp to get it to set right.

[RalliArtist]

omg thats pretty gnarly :( What were doing driving over curbs at 20mph?

[EricS09RA]

it was in a dark shopping plaza that I'm not familiar with. made a left hand turn from a stop sign and never saw that there was an island in the middle of the road. my buddy yelled "look out" but it was too late. :(

[jRox]

Evo X MR BBS with 245/40's

http://i176.photobucket.com/albums/w173/heymynameisjae/melissaR/Suspension/SNV30384.jpg

http://i176.photobucket.com/albums/w173/heymynameisjae/melissaR/Suspension/SNV30377.jpg

[EricS09RA]

^damn those fit nice!

[BravoZero]

jRox, that's damn sexy! What modifications did you have to do to get those to fit and that height?

[jRox]

^damn those fit nice!
Thanks! :cool:

jRox, that's damn sexy! What modifications did you have to do to get those to fit and that height?
Based on my measurements, I'm dropped about 2.2" at the rear and about 3.2" in the front. At this height, rears MUST be rolled and the fronts may have to be slightly rolled (depending on how much camber you run).

[xwxspawnxwx]

http://img692.imageshack.us/img692/7936/img0711uo.jpg

More Pics below
http://imageshack.us/g/692/img0711uo.jpg/

[Gary]

Did you have to roll the fenders to get te rims to work? I'm looking to get new/used rims for my RA and I like the way your car looks. What year did they come from?

[slyy]

Here's a quick one of mine.

http://farm7.static.flickr.com/6139/6016219380_185ef95350_b.jpg

[EricS09RA]

^^^very nice!!!^^^

[slyy]

thanks!!!!!!!!

[ChaseRalli]

jRox and slyy, your cars are sexy as fack.

sorry to say this but i may have to get gold rims now.

[jRox]

jRox and slyy, your cars are sexy as fack.

sorry to say this but i may have to get gold rims now.

Wait till you see her at the LI meet. You better go! :D

[Dave]

18x8+35
215/45-18

http://i4.photobucket.com/albums/y102/DCsports/RA/meet010Medium.jpg

http://i4.photobucket.com/albums/y102/DCsports/RA/mag2013Medium.jpg

http://i4.photobucket.com/albums/y102/DCsports/RA/mag2004Medium.jpg

http://i4.photobucket.com/albums/y102/DCsports/RA/mag2015Medium.jpg

[bwanner]

http://forums.evolutionm.net/members/bwanner-albums-garage-ralliart-picture24775-100-0372-copy.jpg

[Topdown]

18x8+35
215/45-18

http://i4.photobucket.com/albums/y102/DCsports/RA/meet010Medium.jpg

http://i4.photobucket.com/albums/y102/DCsports/RA/mag2013Medium.jpg

http://i4.photobucket.com/albums/y102/DCsports/RA/mag2004Medium.jpg

http://i4.photobucket.com/albums/y102/DCsports/RA/mag2015Medium.jpg

Holy shiz! Those look great and fit perfect! What are they and what mods did you have to do (if any) to run them?

Thanks!!
-Ryan

[SnipeRA]

[QUOTE=Ralliart23;19778]i got them from my local shop in toronto, but its better if you live in the us, you can get them from nextlevelmotoring online and they are really cheap, ship for cheap, and they have all the sizes and colors. they are also a special dealer for xxr so they have colors that other dealers dont in the 522's like bronze.

here is the page

http://www.nlmotoring.com/XXR-522-Wheels-s/1522.htm

hope this helps[

Ralliart23 are you lowered at all?

[Scarab23]

[QUOTE=Ralliart23;19778]i got them from my local shop in toronto, but its better if you live in the us, you can get them from nextlevelmotoring online and they are really cheap, ship for cheap, and they have all the sizes and colors. they are also a special dealer for xxr so they have colors that other dealers dont in the 522's like bronze.

here is the page

http://www.nlmotoring.com/XXR-522-Wheels-s/1522.htm

hope this helps[

Ralliart23 are you lowered at all?

im ralliart23 this is my new username, and yes i am on sportlines.

[Dave]

Holy shiz! Those look great and fit perfect! What are they and what mods did you have to do (if any) to run them?
Thanks!!
-Ryan

No changes necessary. Original tire ans suspension :)

[SnipeRA]

Scarab23 I just got the 522's 18X8.5 +30 225/40/18 i know i need to roll my rears i was just curious what you had to do to your fenders and how they fit?

[Scarab23]

Scarab23 I just got the 522's 18X8.5 +30 225/40/18 i know i need to roll my rears i was just curious what you had to do to your fenders and how they fit?

for you a fender roll is probably all thats necessary, I'm on 9.5's with an even wider tire, a 235, and I'm good the way i am. i pulled my fenders a bit (flared them) but it wasn't necessary, i only needed a roll. the reason i did it was because i thought they'd need more room and pulled them before i got the rims and tires so i could actually drive home from getting them installed. its ok though because i ordered a set of coils and plan on lowering it another 1.5 to 2 inches so the pull will come in handy now.

[johnson kuo]

C:\Documents and Settings\HP\桌面\照片102

[razorlab]

C:\Documents and Settings\HP\桌面\照片102

Internet fail.

[Mu-Meson]

Meh stock rims.

http://i1224.photobucket.com/albums/ee367/mumeson/IMAG0132.jpg

Into....


http://i1224.photobucket.com/albums/ee367/mumeson/IMAG0151.jpg


Did the calipers too while i was at it.

[mitsuXtwo]

I've seen many people doin this and I like it. Did you take the tires off of the rim or just mask the tire?

[Mu-Meson]

I've seen many people doin this and I like it. Did you take the tires off of the rim or just mask the tire?

I used playing cards on the front, and mask at the back.

http://i1224.photobucket.com/albums/ee367/mumeson/Painting%20day/IMAG0127.jpg

[MTZL]

Deck of cards = multiple uses. :D
Very ghetto & cheap, I like it. :cool:

[aralliart]

ADVAN RS - Evolution
VOLK CE28Ns - Ralliart
http://www.socalevo.net/gallery/albums/userpics/10569/normal_IMG_9397.JPG

Enkei RPM2s
http://www.socalevo.net/gallery/albums/userpics/10569/normal_36699_412443304451_720529451_4241890_757308 3_n.jpg

BBS: Evolution MR
http://www.socalevo.net/gallery/albums/userpics/10569/normal_Picture%20024~0.jpg

what lip is that?

[Scarab23]

what lip is that?

he has an evo front end on it

[zeRep85]

he has an evo front end on it

HA! you beat me to it! My reply would have been a long the lines of..

"Its an Evo X lip. So unless you swap entire front ends, you wont be able to use it :)"

[GAbOS]

http://www.clubralliart.com/gallery/albums/userpics/10838/IMG_0735.JPG

So black and matte it serves the purpose too well.

[BravoZero]

http://www.clubralliart.com/gallery/albums/userpics/10838/IMG_0735.JPG

So black and matte it serves the purpose too well.

Which wheels? Those are nice.

[GAbOS]

TSW Nurburgring 17x9 +35 with a custom powder coat.

[wwralliart77]

TSW Nurburgring 17x9 +35 with a custom powder coat.

^ Looks good, I like! ;)

[TrailBrake]

Absolutely beautiful and fits the proportions of the car perfectly :)

What size tire do you use on those rims?

[GAbOS]

They are currently wrapped in 245/45/17

Thanks for the comments!!

[TrailBrake]

Call me crazy, but I think 17s looks better on the RA than the 18s it comes with.

Was there any fender rolling required, and how much do they weigh roughly?

Once again, VERY sharp!

[aralliart]

he has an evo front end on it

where did he buy it at?

[BravoZero]

where did he buy it at?

It's a factory Evo front bumper with some body modifications to make it fit. Wasn't an easy task.

[plastus]

http://www.plastus.net/evolutionm3.jpg

http://www.plastus.net/evolutionm4.jpg

OZ Superturismo LM 18x8 +45mm
235/40-18 Michelin Pilot Sport A/S Plus
Eibach Pro Kit

[BravoZero]

Nice! Those wheels look good.

[frylock]

figured id post a new pic of my wheels

http://i8.photobucket.com/albums/a35/409-EF8/321213_526210918736_179500071_30509020_180339838_n .jpg

[EricS09RA]

^^^VERY NICE!!! Which wheels, what size?

[frylock]

^^^VERY NICE!!! Which wheels, what size?

wedsport SA55m 18x9+20

[Scarab23]

what are you lowered on?

[frylock]

what are you lowered on?

tein flex coilovers with EDFC

[Blaze]

HA! you beat me to it! My reply would have been a long the lines of..

"Its an Evo X lip. So unless you swap entire front ends, you wont be able to use it :)"

Both cars are running VOLTEX lip and splitters, not OEM mitsu. ;)

And yes, the RA is running an evo front end, so the kit will not work on a standard RA unless you convert over.

[GAbOS]

Just made a local pickup of Evo X Enkei's from a guy on evoM. My fourth set of wheels now. I think I need help. I couldn't pass up the deal though.. $500! and less than 5k on them.

[AlphaKennyBody]

Bump Keeping this Thread Alive!

18x9+30

http://i228.photobucket.com/albums/ee196/Kuya_Ralphy/RA3.jpg

http://i228.photobucket.com/albums/ee196/Kuya_Ralphy/RA1.jpg

[Mkid]

I've had some better pics taken since the last time I posted in here.

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/381029_328329950516624_262467407102879_1559470_790 172745_n.jpg

[ralliart11]

my baby
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc4/163063_1674686340292_1031434899_31836876_499237_n. jpg

what size and width are these wheels? how much did u lower it?

[Cesarn2928]

what size and width are these wheels? how much did u lower it?


tires: 225/45/18..
rims: 18x8.5 /// 2" lip--- (35 offset i believe .. i forgot lol)
Lowered with RRM Grip Springs 09+ Ralliart: 1.5 inches in the front and 1.4 inches in the rear.

[2muchboost]

Rota G Gorce 18x9 +30 W/ Nitto NT05 245/40/18

http://i18.photobucket.com/albums/b117/superman83199/2012-01-24_11-22-07_17.jpg

[p1llar]

17x7 +40 Advan Knockoff. On 225/50/17 winter tire, lowered on Pro Kit.

http://i102.photobucket.com/albums/m88/p1llar/Lancers/e81a0596-b405-4b97-b98b-389ec1e5d062.jpg?t=1320240021

http://i102.photobucket.com/albums/m88/p1llar/Lancers/682d4217-4d69-489c-8090-72b8254c09dc.jpg?t=1320239560

http://i102.photobucket.com/albums/m88/p1llar/Lancers/7b5b169d-5fc5-47e3-a5fd-b3b06c3f912a.jpg?t=1320239119

[psyberkilla]

I've been eyeing this post with envious eyes for months, and now I finally get to post mine! :D Enkei Raijin's, 18x8 +40 offset:

http://djpsyber.com/ralliart/P1020670-800.jpg
http://djpsyber.com/ralliart/P1020671-800.jpg
http://djpsyber.com/ralliart/P1020667-800.jpg

[zeRep85]

^ Now all you need to do is lower that monster truck! hehe

Very nice rims though! Enkei FTW!

zeRep

[AlphaKennyBody]

Not Sure If I updated pics but.... Here just in case, Feel free to stop by and talk to me @ MOD2012 CA

http://i228.photobucket.com/albums/ee196/Kuya_Ralphy/Works1.jpg

http://i228.photobucket.com/albums/ee196/Kuya_Ralphy/Me3-1.jpg

http://i228.photobucket.com/albums/ee196/Kuya_Ralphy/KrispyKreme.jpg

http://i228.photobucket.com/albums/ee196/Kuya_Ralphy/Me1.jpg

[hmoobher]

http://i109.photobucket.com/albums/n47/hmoobher/photo2.jpg
http://i109.photobucket.com/albums/n47/hmoobher/photo1-1.jpg
http://i109.photobucket.com/albums/n47/hmoobher/photo-1.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/c0.0.403.403/p403x403/531599_4170845790398_13067026_n.jpg

[mangnok]

Volk racing CE 28 18x8.5+30 wrap with 245/40/18

http://i797.photobucket.com/albums/yy255/Zaghinapa/_DSC0433.jpg

http://i797.photobucket.com/albums/yy255/Zaghinapa/_DSC0431.jpg