PDA

View Full Version : Pictures Of 09 RG Rocking Rota Grids

Racegirl
05-09-2011, 07:54 PM
Hello,

Please enjoy pictures of my 09 RG with new Rota Grids I just installed on Saturday. Thanks for looking.
Racegirl
05-09-2011, 07:55 PM
Here are some more pictures.
Racegirl
05-09-2011, 07:56 PM
Just a couple more.....:D
Mkid
05-09-2011, 09:30 PM
Looks awesome :)
Cesarn2928
05-09-2011, 10:04 PM
Very niceee!! lookin Meeaan!! :)

nice interior!
navonr686
05-09-2011, 11:47 PM
very well done! clean and mean!
mTEV
05-10-2011, 12:04 AM
holy crap... Gimme your rims! I want lol.
Nice set up though :]
E46byeRAhi
05-10-2011, 05:34 AM
i'm in love with the rear, very clean rg
BravoZero
05-10-2011, 07:13 AM
Very nice! Well done.
MTZL
05-10-2011, 11:37 AM
Long time no see. I fell in love with your Borla Exhaust at RRE BBQ meet when it was on the dyno.
BravoZero
05-10-2011, 12:16 PM
Racegirl... how do you like the Borla? That was my first choice but after learning the piping is only 2.75" in diameter, I'm not sure that's good on a turbo'ed car.
Racegirl
05-10-2011, 01:13 PM
Racegirl... how do you like the Borla? That was my first choice but after learning the piping is only 2.75" in diameter, I'm not sure that's good on a turbo'ed car.

Hi BravoZero

I really like the Borla exhaust it's not the cheapest exhaust, but it offers a lifetime warranty which I liked. The sound has a nice deep tone as deep as you can get with four cylinders. I have had no problems with my turbo and car is running great (knocking on wood). I saved a total of 25 lbs of weight on the car from the stock OEM exhaust and I gained about 20 HP from a stock Ralliart. On RRE's dyno I ran 229 AWHP with no tune on the car. Just what you see on my signature page.
EricS09RA
05-10-2011, 01:24 PM
NICE...looks like my cars evil twin:D

Whats the drop on H&R springs? I wanna go with a 245 tire as well, but I'm worried it'll rub with my sportlines.
Racegirl
05-10-2011, 01:35 PM
NICE...looks like my cars evil twin:D

Whats the drop on H&R springs? I wanna go with a 245 tire as well, but I'm worried it'll rub with my sportlines.

Hi Eric,

With the H&R lowering springs, my car has a drop of 1.4" in front and 1.3" in rear with no fender rolling and no rubbing on 245x40x18 tires.
2muchboost
05-10-2011, 01:42 PM
Very nice! I really like your setup...
BravoZero
05-10-2011, 02:02 PM
Hi BravoZero

I really like the Borla exhaust it's not the cheapest exhaust, but it offers a lifetime warranty which I liked. The sound has a nice deep tone as deep as you can get with four cylinders. I have had no problems with my turbo and car is running great (knocking on wood). I saved a total of 25 lbs of weight on the car from the stock OEM exhaust and I gained about 20 HP from a stock Ralliart. On RRE's dyno I ran 229 AWHP with no tune on the car. Just what you see on my signature page.

I think I'm in love... :p

Thank you for the info, I might have to jump back on board with getting a Borla!
Tuqwik4u
05-10-2011, 10:34 PM
Looks great! I own an F3 also BTW, U have any pics of yours?
wwralliart77
05-11-2011, 09:49 AM
Sweet looking ride, diggin' the CF!
initial_d2k
05-11-2011, 04:52 PM
wow I think H&R has the best drop!
RalliNurse
05-11-2011, 05:12 PM
good looking car...looks better then last time :p
eRocKiiN
05-11-2011, 06:47 PM
Look awesome man, I would so buy a set if they were a little more concave (personal taste)!! What lug nuts are those?
GAbOS
05-11-2011, 07:25 PM
With the H&R lowering springs, my car has a drop of 1.4" in front and 1.3" in rear with no fender rolling and no rubbing on 245x40x18 tires.

What offset are the wheels?
Racegirl
05-12-2011, 09:07 AM
Look awesome man, I would so buy a set if they were a little more concave (personal taste)!! What lug nuts are those?

They are Vision Motorsports I bought them off e-bay.
Racegirl
05-12-2011, 09:09 AM
What offset are the wheels?

My wheels are a +44 offset.
BravoZero
05-12-2011, 10:01 AM
245/40-18 tires on 18x8.5 inch wheels with a +44 offset and lowered almost an inch and a half?

Amazing... :)
Racegirl
05-12-2011, 10:50 AM
245/40-18 tires on 18x8.5 inch wheels with a +44 offset and lowered almost an inch and a half?

Amazing... :)

I know, tell me about it. I was fully prepared to roll the fenders but it turns out I didn't have to. Now I haven't done an Auto-X yet so that might be a different story....:)
BravoZero
05-12-2011, 11:02 AM
I know, tell me about it. I was fully prepared to roll the fenders but it turns out I didn't have to. Now I haven't done an Auto-X yet so that might be a different story....:)

Now, I can understand the front is perfectly fine with that setup and not needing modification. But, the rears always have issues. Did you modify your rear camber at all?
BravoZero
05-12-2011, 11:04 AM
Also, is your front chrome ring vinyl wrapped? Too shiny for your basic Plasti-Dip.
Racegirl
05-12-2011, 12:44 PM
Now, I can understand the front is perfectly fine with that setup and not needing modification. But, the rears always have issues. Did you modify your rear camber at all?

Yes, your probably right I do have about 1.24 degree of camber in the rear.
Racegirl
05-12-2011, 12:47 PM
Also, is your front chrome ring vinyl wrapped? Too shiny for your basic Plasti-Dip.

Yes, you got it vinyl wrapped $5.00 at Ace Hardware and about a 10 min job. I have had this same vinyl on my car for 8 months now and it's still looking good.
MTZL
05-12-2011, 12:58 PM
I noticed the nose ring on certain RA is two piece?
Mine is one solid piece without break lines.
BravoZero
05-12-2011, 01:01 PM
I noticed the nose ring on certain RA is two piece?
Mine is one solid piece without break lines.

It's a one-piece design for 2009, but 2010 and 2011 have a two-piece design.