Iconic Designz headlights

[disillusions]

Forgive me if this is in the wrong section, but I really wanted to show you guys the work my buddy has started with the Lancer/RA/Evo X market. Enjoy!

https://www.facebook.com/IconicDesignz

Ready to be reassembled:

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/524999_514602991924068_614209657_n.jpg

Halo test:

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/560320_514602985257402_688452577_n.jpg

Sealed:

https://sphotos-b.xx.fbcdn.net/hphotos-ash4/485150_517091278341906_235753131_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-ash4/318294_517091318341902_560145835_n.jpg

[disillusions]

Demon eye DRL:

https://sphotos-a.xx.fbcdn.net/hphotos-prn1/542742_517091365008564_792684036_n.jpg

Tinted turn signals:

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/554235_517091381675229_6033595_n.jpg

More pics!

https://sphotos-b.xx.fbcdn.net/hphotos-snc7/318256_517091455008555_1252820127_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-frc1/21631_517091478341886_891688608_n.jpg


The lights used were a set of non-HID lights, to which he did a retrofit; but I'm told he can do the factory HID sets without an issue.

https://www.facebook.com/IconicDesignz

[RalliNurse]

Look nice...where is ur buddy located at?

[MTZL]

How much? how about factory match paint for the inside trim?

[mangnok]

Nice !great work !

[crak]

damn, thats nice. how do you get the inner circular lights to work?

[baggelis]

How much? how about factory match paint for the inside trim?

^^^x2 That was exactly what i was thinking lol

[disillusions]

Look nice...where is ur buddy located at?

He's in Georgia. Pretty quick turn around time too.

How much? how about factory match paint for the inside trim?

^^^x2 That was exactly what i was thinking lol


Depends on what you want. That particular job was $750, but it came with a full retrofit as well. Paint is about $150-175 depending on what style you want, tinted turns are $50, demon eyes are $75 for a DRL setup and $50 for a plain lit version, and I'm still waiting for a more substantive quote for the CCFLs. All of the prices were quoted for a job I asked him about, so don't be surprised if they change depending on the scope of the job. He also mentioned something about a lens upgrade for factory HID housings, but I'm still getting the details on it. As for paint matching, his painter can do it without a problem. He just needs the paint codes so the guy can mix it, and you're all good.

Nice !great work !

Damn skippy! My friend has his work on his 4G, and they're great quality.

damn, thats nice. how do you get the inner circular lights to work?




Two wires like any halo setup. You can hook them up however you'd like. Here's a picture of the back for reference:

https://sphotos-b.xx.fbcdn.net/hphotos-prn1/536919_517091391675228_1467060005_n.jpg




I'll try to get him on this forum though so he can answer the questions in more detail.

[crak]

thank you for the prompt reply. What size are those halo rings?

[disillusions]

thank you for the prompt reply. What size are those halo rings?

That, I don't know. I can ask, but I can't make any promises that he'll actually tell me.

[crak]

they look to be 2.5 or 3 inch:) most likely 3inch. But its worth the shot

[disillusions]

I forgot to add this earlier. This is his facebook page if you guys want to give it a "like" and check out more of his work: https://www.facebook.com/IconicDesignz

[Iconic Designz]

Look nice...where is ur buddy located at?

Hinesville, GA. Most customers ship me their lights. Those Evo lights were for someone in N.C. The housings themselves were the Depo OEM style ones off ebay. I've had customers from as far as California, and even Alberta, Canada have me do their headlights!

How much? how about factory match paint for the inside trim?
^^^x2 That was exactly what i was thinking lol

As Joe said I do have general pricing available. But if someone wanted something basic done I still have to tack on a surcharge for opening and sealing the headlights. Speaking of sealing them, every headlight is resealed with additional sealant.

Paint matching can also be done, let me show you an example of some color matching.
Color matched headlights:
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/11208_511393565578344_958195803_n.jpg

Color matched Shrouds:
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/30360_472680232783011_368659882_n.jpg

Nice !great work !

Thank you!

damn, thats nice. how do you get the inner circular lights to work?

They are CCFL's so the two white wires were pinned to their connector which then plugs into an inverter box. The inverter box plugs into your power input pigtail.


Please do like my facebook page to show support! I'd love to bring some nice custom headlights to the Lancer/RA/Evo community here. http://www.facebook.com/IconicDesignz

[disillusions]

The Evo headlights finally got installed on the tester. Here's the initial shot of them. More to come when the owner gets some HD photos up.

https://sphotos-b.xx.fbcdn.net/hphotos-prn1/17227_535757549808612_1094010329_n.jpg

[RalliArtist]

holy smokes those look amazing

[disillusions]

holy smokes those look amazing

I couldn't agree more

[Iconic Designz]

Revisiting this thread because I'm currently working on another set of lights for a ralliart. This time the RA is Octane blue, so instead of red accents they will be color matched to the car. About mid last year I started painting everything on my own.

Here's an example of a set of 3g tail lights I did recently, I also tinted the reflectors and reverse light using automotive paint.
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc3/t1/1505183_665732673477765_482759875_n.jpg

You can view a bunch of my work and contact me via the facebook page still: www.facebook.com/iconicdesignz

Thanks for looking :)

[jester57]

Wow these are sweet.. on my 13 ww make it look like terminator eyes hhmmmm

[RalliArtist]

i think my buddy got a set from you guys and had a less than satisfied experience with the whole process

[iralli_iskustvo]

Looks great.

[Iconic Designz]

Thanks guys, I should have pictures of this latest set finished within 2 weeks.

i think my buddy got a set from you guys and had a less than satisfied experience with the whole process

Interesting, this is the only other set I've done for the Lancer platform.

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/t1/969680_578575195526847_1885311853_n.jpg

Nevertheless the work I do is warrantied for up to 1 year after completing the headlights, so perhaps you should contact him and see if I was the one to do his lights and encourage him to contact me if that is the case.

[Iconic Designz]

Sean contacted me looking for a nice new set of Bixenon HID housings for his Octane Blue Lancer Ralliart. He based his goals off of Ian's lights that I did previously. These headlights were treated with Blue Daytime demon eyes (inside the projectors), 1 CCFL halo, custom painted Kalapana Black and Octane blue housings, automotive tinted turn signal lens, FxR 3.0 3" lens projectors and 5k, white, HID bulbs. As always extra sealant was added to the housings to protect from condensation. The housings were custom wired to be as plug and play as possible. These have HID low beam and both HID and halogen high beams. Lastly, headlight lens sealant was applied to keep these lights from ever getting hazy or yellow.

Thanks guys and enjoy!

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/t1/1912056_692027407514958_611314171_n.jpg

https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/t1/p180x540/1962867_692027490848283_72728231_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/t1/1622174_692027464181619_1273303607_n.jpg

https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/t1/1621747_692027480848284_732627536_n.jpg