PDA

View Full Version : let me know your opinion


Ralliart23
06-22-2010, 09:18 AM
i have finally decided which rims i want to put on my black RA. took a while, i decided on the breyton race gts r rims.

http://www.tirerack.com/wheels/WheelCloseUpServlet?target=wheelCloseUp&wheelMake=Breyton&wheelModel=Race+GTS-R&wheelFinish=Black+w%2FRed+Stripe

im pretty sure they'll fit haha :s

let me know your opinion

TheBlackBeast
06-22-2010, 09:23 AM
LOVE those!!!

I really like how they put the red accent stripe on the inside behind the spokes.

Ralliart23
06-22-2010, 11:03 AM
yeah they were the first pair i could find that had black with red incorporated, but not too much red because i find it gets way too overwhelming when theres any more than in those ones

Jackal
06-22-2010, 06:43 PM
Ok but It did not state the width or the offset of the rim, so exactly what size will the rims be with what offset and what brand and size tires will these rims be equiped with ??

Ralliart23
06-23-2010, 11:47 AM
*embarrassed*

the breyton rims are only made for bmw's haha. my bad

i found another pair which fits the ralliart, and look pretty similar, they are the tenzo type m.

http://www.1010tires.com/wheel.asp?wheelmodel=Type-M+-+Black/Red&wheelbrand=tenzo+r

im not quite sure what offset to get though because i want them to be level with the fenders. the stock rims are pushed in like 2 centimeters. which offset would you guys suggest. they can always stick out just a little bit

CJ RA 10
06-24-2010, 08:51 PM
have seen similar wheels on lancers round here,its a good look go for it!

jay10ralliart
06-29-2010, 10:21 AM
*embarrassed*

the breyton rims are only made for bmw's haha. my bad

i found another pair which fits the ralliart, and look pretty similar, they are the tenzo type m.

http://www.1010tires.com/wheel.asp?wheelmodel=Type-M+-+Black/Red&wheelbrand=tenzo+r

im not quite sure what offset to get though because i want them to be level with the fenders. the stock rims are pushed in like 2 centimeters. which offset would you guys suggest. they can always stick out just a little bit
None of these will be flush with the fenders without using spacers. 18 X 8.5 +30 or 18 X 9 +36 would be what size you are looking for to be flush.

wutangmo15
06-29-2010, 04:04 PM
Those look good and I'm sure they'll look really sexy on your black Ralliart. Make sure you post pictures when you get them. If you're lowered, you'll most likely need to roll your rear fenders. If you're stock and you go wider than 8", then you'll probalby need to roll your rears as well.