FS Complete Greddy Intercooler Kit

[ralli_kid]

I am selling my greddy intercooler kit that I was going to put on but I need the money instead. This kit goes for 650 + shipping and I will be selling it for 600 obo. It's brand new. I only opened the box to see that everything came with it. Let me know if your interested.

[Ralliart23]

where do you live? canada or us

[Ralliart23]

nevermind i just saw it says california my bad

[zeRep85]

Anaheim, Canada :)

[Tuqwik4u]

Do you have any pics?

[ralli_kid]

If anyone is interested text me so I can send you the pics....

(714) 504-8256


I am located in anaheim, ca

[wwralliart77]

Here's the pic that Greddy used. Not a bad price either. I've seen them advertised for as lil as $520 but with shipping costs it totals well over $600. Bump for the seller.

[wwralliart77]

If you look at the pic I posted closely it seems that there are 3 IC pipes...? Looks like there are two lower pipes and then the upper pipe. You guys following me here or am I mistaking it for something else? :confused:

[MTZL]

If you look at the pic I posted closely it seems that there are 3 IC pipes...? Looks like there are two lower pipes and then the upper pipe. You guys following me here or am I mistaking it for something else? :confused:

LOL. IT DOES LOOKS LIKE IT BUT I doubt thats the case,
its probably got S bend on it.

[zeRep85]

if you look at the pic i posted closely it seems that there are 3 ic pipes...? Looks like there are two lower pipes and then the upper pipe. You guys following me here or am i mistaking it for something else? :confused:

hahahahahahha wtf! 2 licp!

[zeRep85]

LOL. IT DOES LOOKS LIKE IT BUT I doubt thats the case,
its probably got S bend on it.

It does have an S bend. The GReddy website has more pics of it; Part #12030499.

Different size than most common I/C cores too..181mm x 600mm x 76mm (7.13" x 23.62" x 3.00")

[wwralliart77]

It does have an S bend. The GReddy website has more pics of it; Part #12030499.

Different size than most common I/C cores too..181mm x 600mm x 76mm (7.13" x 23.62" x 3.00")

I need some clarification here. Does this mean you would have to use the S pipe in order to utilize this particular intercooler or are there more configurations available? The pic I posted is only adding to my confusion.

[zeRep85]

http://www.greddy.com/products/ic-oil-rad/intercooler/

Go there and look for RalliArt and look at the pictures...didnt feel like uploading :)

It looks like it has a regular UICP but then the S pipe connects to that.

[zeRep85]

AND it looks like it utilizes the stock upper intercooler pipe.

[ralli_kid]

Sorry I havent been on in a while. Yes the ic pipes that go to the uicp is an S bend one and the licp replaces the cheap plastic one. I will have the uicp for sale soon but that will be going for 350. but for all together I am willing to go 850

[zeRep85]

Why are you selling it?

Just wondering..

[ralli_kid]

I am actually going for a bigger intercooler set up. Gonna see if I can fit a 3.6 or 4 in intercooler

[zeRep85]

I am actually going for a bigger intercooler set up. Gonna see if I can fit a 3.6 or 4 in intercooler

Im digging my ETS 3.5 setup :)

They fairly cheap too..

You planning to make BIG power for a 4" IC?

[ralli_kid]

yes I am but if I can't sell it by the end of this week I am just going to keep it and slap it on the car which is going to be a nightmare since I am going to have the labtop out with me just to remove the front bumper

[zeRep85]

yes I am but if I can't sell it by the end of this week I am just going to keep it and slap it on the car which is going to be a nightmare since I am going to have the labtop out with me just to remove the front bumper

Well let me know if you do, im interested to see 'live' someone removing the bumper..so when i cut evo holes! rre-styley

[ralli_kid]

Lol if I do remove it its going to be this thursday.