ClubRalliart.com

ClubRalliart.com (http://www.clubralliart.com/index_forum.php)
-   2009+ Lancer Ralliart General (http://www.clubralliart.com/forumdisplay.php?f=8)
-   -   finding boost leak? (http://www.clubralliart.com/showthread.php?t=4014)

dennis_svensson 07-09-2013 12:07 AM

finding boost leak?
 
Hi how do i find a boost leak the best way?
I did try soap water with revs on 3-4k in park but dident hear Anything.
When i drive i hear alot more noise

MTZL 07-09-2013 10:16 AM

To check for leak you can do "boost leak test".
You can build your own boost leak tester.

http://www.clubralliart.com/showthre...ght=boost+leak

I have been stressing everyone to use torque wrench to spec. because of things like this. Most mechs' doesn't use torque wrench.

how do you know how tight it is? Torque wrench to spec.

The only time I had boost leak after I took my car in for timing chain replacement under warranty @ the dealership, my UICP pop-off on the freeway.
Since i had to go back & make sure all bolt are torque to spec.

====================================

You dont need to start your car & rev to 3k rpm.

Leave your car off.

Build yourself a boost leak tester from above link youtube video.

Connect your boost leak tester to air compressor.

All you're going to do is run air in the system & water spray bottle may help.
Once you got some air in the system you will hear the leak & use water spray bottle to pin point the leak.

dennis_svensson 07-09-2013 11:58 AM

ok thx!
shuld i remove the oil cap when i presure uicp down to ic? I saw a video when they did that
the link dident work but i went out and got a car tire valve and epoxyglue.
tomorrow ill go and get this :D http://www.biltema.se/sv/Bil---MC/Ve...pressor-15217/
its about 13 US-dollar :). gets power from 12v lighter.
and pump it up to 18-20 psi

MTZL 07-09-2013 12:16 PM

Do not remove oil cap.

dennis_svensson 07-11-2013 09:16 AM

made this http://img526.imageshack.us/img526/2066/wrgb.jpg
did a plastic one to for fun.
the uicp with the wrong cup
http://img203.imageshack.us/img203/9710/vhzt.jpg
sux i have to w8 2 weeks to get a new cup :( im taking a trip

dennis_svensson 07-12-2013 10:07 AM

so i finaly removed the front bumper again, and alot faster hehe.
pressurise the IC and was on about 25 psi for 5 mins untill the plastic plug slided off :( gotta make another in metal :).
what torq shuld i put on all the clamps?

dennis_svensson 07-31-2013 07:13 AM

found 3 leeks but still leeking :(.
when i put pressure in the uicp i hear sound coming from the air box.
where dose it leek?


All times are GMT -7. The time now is 02:12 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright (c) 2011 RnD Media LLC