Reset the maintanence interval?

[19 Delta]

I changed my oil this past weekend, around 1,000 miles. I found the "oil" reset trick and did it, now it reads 8,000 miles or 8 months.
I want to change the default setting to 3,000 miles, the owners manual says you have to visit mr. dealership to have THEM do it...
can anyone help me avoid the dealership and tell me how to re-program the service interval?
My wife's Pacifica is a snap to dial in any mileage you want from 2,000 up to 5,000.

Thanks,
Tim

[RALM]

thats a good question id like to know aswell when I hold the info button for the mantanance section to reset mines auto matically goes to 10 months and like 5800 miles.

[BravoZero]

It's been mentioned more than once on this site. Search.

[MikeW-RRE]

I searched for "Reset the maintanence interval" and it only brought up this thread :-(

Mike W

[tencents]

http://www.clubralliart.com/showthre...et+maintenance
http://www.clubralliart.com/showthre...et+maintenance

[19 Delta]

I also did try searching...but no love.
I tried the supplied links but they don't seem to work for me

I guess I have to head to the dealer.

Thanks,
Tim

[MTZL]

You do not need to go to the dealership for this. I will post the instructions later.

[tencents]

Taken from evom forum:

Some useful info fromthe service manual - here is how to reset your Service Reminder, Change the Maintenance Schedule (factory default is 6 months/7,500 miles but those of us requiring the "Severe Maintenance" schedule can change it as outlined below), or inactivate it altogether:

HOW TO CANCEL THE SERVICE REMINDER WARNING

1. Turn the ignition switch to the "OFF" position.
2. By operating the meter information switch, the warning period is displayed on the multi information display.
3. Press the meter information switch once for 1.2 seconds or longer.
4. The service reminder indicator flashes.
5. While the service reminder indicator flashes, press the meter information switch once for less than 1.2 seconds.
6. The service reminder indicator is turned ON, and "CLEAR" is displayed on the multi-information display for 3 seconds.
7. After "CLEAR" is displayed for 3 seconds, the warning period to the next time is displayed.

HOW TO SET THE SCHEDULE
1. Turn the ignition switch to the "OFF" position.
2. By operating the meter information switch, the warning period is displayed on the multi information display.
3. Press the meter information switch once for 1.2 seconds or longer.
4. The service reminder indicator flashes.
5. While the service reminder indicator flashes, press the meter information switch 3 times consecutively for 1.2 seconds or longer.
6. The service reminder indicator is turned ON, and the current schedule is displayed on the multi information display.
7. While the current schedule is displayed, press the meter information switch 3 times consecutively for less than 1.2 seconds.
8. The multi information display is shifted to the schedule selection mode.
9. When the meter information switch is pressed for less than 1.2 seconds, the schedule is shifted, and when the switch is pressed for 1.2 seconds or longer, the displayed schedule is set.
10. The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.

ScheduleWarning types Warning criteria
NAS 10 (initial setting) Elapsed time (month) Every 6 elapsed months
Driving distance (miles) Every 7,500 miles of driving distance
Driving distance (km) Every 12,000 km of driving distance

NAS 11 Elapsed time (month) Every 3 elapsed months
Driving distance (miles)Every 3,750 miles of driving distance
Driving distance (km) Every 6,000 km of driving distance

NAS 20 Elapsed time (month) Every 5 elapsed months
Driving distance (miles) Every 5,000 miles of driving distance
Driving distance (km) Every 8,000 km of driving distance

NAS 21 Elapsed time (month) Every 4 elapsed months
Driving distance (miles) Every 3,750 miles of driving distance
Driving distance (km) Every 6,000 km of driving distance

HOW TO INACTIVATE THE SERVICE REMINDER
FUNCTION

By setting to "OFF Display" or "Function OFF" when the schedule is set, the service reminder function can be inactivated.

When "OFF Display" is selected
_ Even when the check warning period is reached, the service reminder display is not displayed.
_ Even if the service reminder screen is displayed by the meter information switch
operation, "OFF" is displayed.

When "Function OFF" is selected
_ Even when the check warning period is reached, the service reminder display is not displayed.
_ Even with the meter information switch operation, the service reminder screen is not displayed.

[tencents]

To reset back to previous maintenance schedule
from http://www.clubralliart.com/showthre...et+maintenance

Turn off ignition completely
Ensure drivers door is closed completely
Press the "Info" button on the instrument panel
Go to the Maintenance option and hold "Info" down to access it
Repeatedly press "Info" to get the word "Clear" to display on the instrument panel
Hold down the "Info" button to clear the maintenance timer
All done!

[MTZL]

Thanks for the update tencents.