So today I was driving It was raining pretty decent went over a few water puddles I couldn't swerve from threw an asc code and brake system code so I pulled over reset the ecu and re flashed the stage 3 access port tune was fine. Then I went to get in and start it and all the codes came one every single service code and all won't click when I try and turn it over and every time nothing and the access port can't connect to the ecu... Any ideas?
Sounds like it is still in "programming mode". Unfortunately, i'm not sure what your options are with the accessport. Same thing happened to me with the tactrix and ecuflash, but i was able to take it out of programming mode with ecuflash.