08-25-2014, 12:41 AM
|
Junior Member
|
|
Join Date: Aug 2014
Posts: 16
|
|
Help on installing an injen Cold Air Intake System
Hi Guys,
I'm looking at installing a Injen Cold Air Intake System (# SP1837 /
http://www.lancershop.com/customer/p...cat=175&page=1)
first off, has anyone done a DIY on this intake (on a ralliart with fog lights)
secondly, does anyone have any instructions on the installation of the intake and could i possibly use this video as a guide ? ( https://www.youtube.com/watch?v=lZvH16192_I)
many thanks, any help would be appreciated.
|
08-25-2014, 05:18 AM
|
|
Member
|
|
Join Date: Feb 2014
Posts: 63
|
|
Quote:
Originally Posted by p3aker
|
Do you have a ralliart? The video is for a regular lancer.
|
08-25-2014, 05:26 AM
|
Junior Member
|
|
Join Date: Aug 2014
Posts: 16
|
|
air intake
Quote:
Originally Posted by blkdrgn09
Do you have a ralliart? The video is for a regular lancer.
|
Yeah i know. I have an 09 ralliart, just wanted to know if I could use the video as a rough guide
|
08-25-2014, 05:40 AM
|
|
Member
|
|
Join Date: Feb 2014
Posts: 63
|
|
Quote:
Originally Posted by p3aker
Yeah i know. I have an 09 ralliart, just wanted to know if I could use the video as a rough guide
|
Relatively similar i believe maybe slight difference in piping and clearance due to intercooler and such but should be pretty much a bolt on. Did you search up on effectiveness and issues w intake on our cars btw?
|
08-25-2014, 05:48 AM
|
Junior Member
|
|
Join Date: Aug 2014
Posts: 16
|
|
Quote:
Originally Posted by blkdrgn09
Relatively similar i believe maybe slight difference in piping and clearance due to intercooler and such but should be pretty much a bolt on. Did you search up on effectiveness and issues w intake on our cars btw?
|
Nope, haven't done my full research just yet. It was the only cold air intake I could fine that fit the ralliart. If you're bother to share some of your insight I would really appreciate it
|
08-25-2014, 05:59 AM
|
|
Member
|
|
Join Date: Feb 2014
Posts: 63
|
|
Quote:
Originally Posted by p3aker
Nope, haven't done my full research just yet. It was the only cold air intake I could fine that fit the ralliart. If you're bother to share some of your insight I would really appreciate it
|
Of course, not a problem. As far as a cold air intake goes, it really will not do much for our cars. The stock intake system is efficient enough, if you look at the way it is set up, there's pretty direct air flow coming in. Not to mention the fact that it may throw codes and such due to change in air flow. You usually want a tune or at least a flash with a tactrix cable to accomodate the change in the above. When i bought mine, i also test drove one with an intake and the only difference i noticed was a slightly better throttle response, but it also was already throwing a code. So IMO not worth the $300 for the intake alone. All i did was get a reusable k&n filter which i picked up at a local car parts store and that alone improved almost as much at the mere cost of like $40-50 ...better investment would be:
* a used Evo X bpv
*used evo x intercooler
*used upper and lower evo x intercooler piping
That alone doesnt require tune and will run you less than 300 and you can ususally find all these on here or evolutionM.net....that's what i did...also picked up a boost pill and tactrix cable for another 200 but decided to get a custom tune so that ran 450 but you can do similar with tactrix cable if you're comfortable messing with that stuff.
|
08-25-2014, 03:52 PM
|
|
Regional Moderator
|
|
Join Date: Aug 2011
Location: CYPRESS,CA
Posts: 1,067
|
|
CAIs are dyno tested not to add power unless you're going with a x turbo, and even then only with a tune.. So I'd go K&N or a Cosworth panel filter..
__________________
Ralliart/EVO rear fender rolls and tab grinding $100, guaranteed fitment(when possible, you should always do the fitment research first)
minimal partial rolls $60(no tab grinding)
So cal fender roller rental $10 per day(3 day min) with $200 cash deposit. Includes Eastwood fender roller, heat gun and heavyweight carry bag.
|
08-25-2014, 11:29 PM
|
|
Administrator
|
|
Join Date: Oct 2008
Location: SoCal
Posts: 178
|
|
agreed ^
adding a CAI without a proper tune would just net you the same results, if not maybe less.
|
08-26-2014, 06:03 AM
|
Junior Member
|
|
Join Date: Aug 2014
Posts: 16
|
|
Quote:
Originally Posted by blkdrgn09
Of course, not a problem. As far as a cold air intake goes, it really will not do much for our cars. The stock intake system is efficient enough, if you look at the way it is set up, there's pretty direct air flow coming in. Not to mention the fact that it may throw codes and such due to change in air flow. You usually want a tune or at least a flash with a tactrix cable to accomodate the change in the above. When i bought mine, i also test drove one with an intake and the only difference i noticed was a slightly better throttle response, but it also was already throwing a code. So IMO not worth the $300 for the intake alone. All i did was get a reusable k&n filter which i picked up at a local car parts store and that alone improved almost as much at the mere cost of like $40-50 ...better investment would be:
* a used Evo X bpv
*used evo x intercooler
*used upper and lower evo x intercooler piping
That alone doesnt require tune and will run you less than 300 and you can ususally find all these on here or evolutionM.net....that's what i did...also picked up a boost pill and tactrix cable for another 200 but decided to get a custom tune so that ran 450 but you can do similar with tactrix cable if you're comfortable messing with that stuff.
|
thanks for the info man, I'm a little new to the whole car modding scene so i have a few questions that I'm hoping you can answer .
first of all, with the BPV would I be attaching that to the intercooler ?
secondly, how safe is flashing my ECU with the tactrix cable am I able to resort to the stock map if something goes wrong ?
also, is there a specific tactrix cable that i must get for a ralliart or are they universal.
Cheers!
|
08-26-2014, 06:04 AM
|
Junior Member
|
|
Join Date: Aug 2014
Posts: 16
|
|
Quote:
Originally Posted by Markspd6
CAIs are dyno tested not to add power unless you're going with a x turbo, and even then only with a tune.. So I'd go K&N or a Cosworth panel filter..
|
Thanks for your input too !
again, new to the modding scene.. what would CAI stand for ?
Cheers!
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 05:55 PM.
|
|