06-06-2013, 01:15 PM
|
|
Senior Member
|
|
Join Date: Nov 2008
Posts: 831
|
|
BUMP for Thursday!
|
06-06-2013, 08:58 PM
|
|
Senior Member
|
|
Join Date: May 2012
Location: West Chester, PA
Posts: 130
|
|
What's good J... Question, would these work with the OEM projector set up?
I want to bypass the fog lights and use them regardless of headlights being on or off. Not sure if you have any tips for that if you bypass doesnt do that trick.
__________________
^click sig for Fred's Ralliart Build^
|
06-09-2013, 04:25 PM
|
|
Junior Member
|
|
Join Date: May 2013
Location: Fort Myers, FL
Posts: 25
|
|
I have this system from jrox and it works. I wired it as designed and it did not bypass allowing the fog lights to be on when the headlights aren't.
|
06-13-2013, 10:43 AM
|
|
Senior Member
|
|
Join Date: Nov 2008
Posts: 831
|
|
Quote:
Originally Posted by Fstarz
What's good J... Question, would these work with the OEM projector set up?
I want to bypass the fog lights and use them regardless of headlights being on or off. Not sure if you have any tips for that if you bypass doesnt do that trick.
|
DRL Bypass doesn't work that way.
Do you have HID's in your fogs? If so, just swap the connections to the HID Ballast. This way, when you turn on the Low Beams, your Fogs will turn ON. When you toggle the Foglights ON, the Low Beams will turn ON.
Quote:
Originally Posted by Rallyrun09
I have this system from jrox and it works. I wired it as designed and it did not bypass allowing the fog lights to be on when the headlights aren't.
|
My DRL Bypass was designed to eliminate the Daytime Running Lights in the Low Beams. The Foglights run on a completely independent wire harness.
|
06-14-2013, 07:25 AM
|
|
Senior Member
|
|
Join Date: May 2012
Location: West Chester, PA
Posts: 130
|
|
Quote:
Originally Posted by jRox
DRL Bypass doesn't work that way.
Do you have HID's in your fogs? If so, just swap the connections to the HID Ballast. This way, when you turn on the Low Beams, your Fogs will turn ON. When you toggle the Foglights ON, the Low Beams will turn ON.
My DRL Bypass was designed to eliminate the Daytime Running Lights in the Low Beams. The Foglights run on a completely independent wire harness.
|
No HID kit in the fogs yet.. I have xb LED halos in the headlights that are wired to my normal headlights and manual daytime running lights.. I just want to be able to turn on the fogs while the halos are on as well.
I'll try snooping around online to see if I find anything.
__________________
^click sig for Fred's Ralliart Build^
|
06-14-2013, 07:58 AM
|
|
Moderator
|
|
Join Date: Sep 2010
Posts: 725
|
|
Quote:
Originally Posted by Fstarz
I just want to be able to turn on the fogs while the halos are on as well.
|
I have my fogs wired to BE the DRLs. You don't have to turn them on, as they come on when the car comes on. You CAN install a switch to be able to turn them off, but I didn't, as mine are always on. But as far as using the factory foglight switch to turn on the foglights without turning on the headlights is impossible, without doing what was suggested, actually hooking the fogs up to the low beam connector and vice versa. I like mine on all the time anyway. It's easy to do, and it's all done with a simple relay under the dash.
|
06-16-2013, 01:02 AM
|
|
Senior Member
|
|
Join Date: Jan 2013
Location: Missouri
Posts: 704
|
|
Quote:
Originally Posted by jRox
My DRL Bypass is also compatible with Stock OEM Bulbs. Aftermarket HID's are not a necessity to use my DRL Bypass. It will operate the same and eliminate the DRL's as designed to do so.
Creating a custom button would involve automotive wiring. I simply a provide a Plug & Play solution.
|
Can I run DRL bypass with HID's?
__________________
RA - Built head - Built SST - ID1000cc - GTX3576R - GSC S2 cams - GSC beehives/Ti retainers - Timing Chain kit - ARP head studs - AMS fuel rail - AMS Widemouth dp - TurboXS exhaust - DrivenFab oil catch can - MAP oil pan - MAP cast manifold - AEM wideband - COBB 3 port EBCS - Tial QRJ - Sakura 3.5 intake - Kozmic Walbro 450 fuel pump - Depo Racing fmic/licp - TS engine/exhaust mounts - Cusco bar - D2 RS coil - Megan Racing control arms/toe - Whiteline sway bars - Brembo 6 piston
Tuned by TJ
|
06-16-2013, 01:04 AM
|
|
Senior Member
|
|
Join Date: Jan 2013
Location: Missouri
Posts: 704
|
|
Quote:
Originally Posted by Drew
I have my fogs wired to BE the DRLs. You don't have to turn them on, as they come on when the car comes on. You CAN install a switch to be able to turn them off, but I didn't, as mine are always on. But as far as using the factory foglight switch to turn on the foglights without turning on the headlights is impossible, without doing what was suggested, actually hooking the fogs up to the low beam connector and vice versa. I like mine on all the time anyway. It's easy to do, and it's all done with a simple relay under the dash.
|
Are those real functional vents on the front bumper?
__________________
RA - Built head - Built SST - ID1000cc - GTX3576R - GSC S2 cams - GSC beehives/Ti retainers - Timing Chain kit - ARP head studs - AMS fuel rail - AMS Widemouth dp - TurboXS exhaust - DrivenFab oil catch can - MAP oil pan - MAP cast manifold - AEM wideband - COBB 3 port EBCS - Tial QRJ - Sakura 3.5 intake - Kozmic Walbro 450 fuel pump - Depo Racing fmic/licp - TS engine/exhaust mounts - Cusco bar - D2 RS coil - Megan Racing control arms/toe - Whiteline sway bars - Brembo 6 piston
Tuned by TJ
|
06-20-2013, 10:23 AM
|
|
Senior Member
|
|
Join Date: Nov 2008
Posts: 831
|
|
Quote:
Originally Posted by iralli_iskustvo
Can I run DRL bypass with HID's?
|
Yes, it's compatible with both HID's and Stock 9006 OEM Bulbs.
|
06-20-2013, 11:42 AM
|
|
Moderator
|
|
Join Date: Sep 2010
Posts: 725
|
|
JRox, have you ever considered making the fuse box kit to do this? Seems alot cleaner, with less wiring and parts than the relay harness. I currently have one of your harnesses, and it's great, but I don't like it hooking right to the battery. If you start making the "in fuse box" kit to do this, I would definitely pick one up instead of going through the hassle of making it myself and buying the relay.
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 11:38 PM.
|
|