Hey,
So, my 09' RA has now had 3 different motors put into it in the last 4 months. My original motor stopped because of the timing chain, therefore It has been in the shop.
With this 3rd motor that has been put into it from the shop, it has actually stayed and been working out nicely unlike the other two, however the motor is reading high boost intake codes for the service engine soon light.
The light appears on the dash every time I lay into it but have never noticed the boost gauge being maxed out when doing so. The light does not stay on it just blinks and then disappears.
I never had any problems with this before with the original motor so I am needing some help on what may be causing this. The shop keeps telling me it has something to do with the blow off valve.
I do have an aftermarket blow off valve, I also have a COBB tuner for it, and recently put in a boost pill from AMS.
Looking for any ideas and places to start to figure out what might be causing the high boost intake codes from the scanner.
Thank you lots.