ClubRalliart.com  
  #1  
Old 10-21-2014, 04:09 AM
02ES=>09RAL's Avatar
02ES=>09RAL 02ES=>09RAL is offline
Junior Member
 
Join Date: Aug 2013
Posts: 3
Post Boomba Front & Rear Motor Mounts/Torque Dambers

Boomba's having a sale on their motor mounts.
http://www.boombaracing.com/mitsubis...orque-dampers/

The front was very easy, but the rear was the worst because of how tight the area was.
Wobble extensions,universal joints, flexible joint ratchets, and flexhead ratchets were a huge help.

I had to remove the Intake's air box to get better access from the top.

For step 8, I used a hydraulic jack to push up the engine a bit so the main bolt could slide out.

I got to step 13 and and my progress stopped. The instructions say to move the motor mount out of the way to access the top 17mm motor mount bracket bolt, but I couldn't get agood angle to put my power behind it with the universal joint.
Spent 3+ hours attempting to remove that top bolt.

I used a Dremel tool to cut the rear motor mount in half.

During step 21, I had to use the hydraulic jack again to get the motor mount and the bracket to line up I could slid the bolt through both with out and hassle.




/myexperience :P
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:34 AM.




Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright (c) 2011 RnD Media LLC