ClubRalliart.com Your ad here
  #1  
Old 03-27-2015, 08:31 PM
Notenoughhp Notenoughhp is offline
Junior Member
 
Join Date: Mar 2015
Posts: 25
Default Vacuum Line Help

I'm new here. I have a 2011 Ralliart. Today I was hooking up the cobb 3 Stage boost controller. So i noticed between the intake box and my firewall there was a vacuum line going through the clip on the intake box that holds it in place. This hose is completely unhooked. Would someone be able to post a picture of where this connects to or direct me in the right direction. Thanks in advance
Reply With Quote
  #2  
Old 04-06-2015, 10:13 PM
w8less1der w8less1der is offline
Member
 
Join Date: Mar 2015
Posts: 37
Default

Did you figure this out or do you still need to see a picture?
Reply With Quote
  #3  
Old 04-13-2015, 06:01 PM
Notenoughhp Notenoughhp is offline
Junior Member
 
Join Date: Mar 2015
Posts: 25
Default

Yes I still need a picture please..
Reply With Quote
  #4  
Old 04-14-2015, 06:02 AM
w8less1der w8less1der is offline
Member
 
Join Date: Mar 2015
Posts: 37
Default

Let me know if what's in these pictures is what you need:

https://cobb.app.box.com/752750instructions
Reply With Quote
  #5  
Old 04-14-2015, 08:41 PM
Notenoughhp Notenoughhp is offline
Junior Member
 
Join Date: Mar 2015
Posts: 25
Default

No I explained this wrong. I got the boost control solenoid hooked up. Just something I noticed while doing this. There is a hose (maybe a vacuum line) that clips into the back of the intake box but goes to another location. This line is unhooked and just sitting there (not connected to anything or blocked off) just a little confused on what it would go to. I can take a picture tomorrow and show you.

I think the issue is the car was purchased used. After digging in a little this car was modified before and then half ass returned to stock to trade in at the dealership. From what i noticed the previous owner had aftermarket which maybe could effect this hose. It looks like he had the boost solonoid on there and a aftermarket intake. haven't noticed anything else yet.
Reply With Quote
  #6  
Old 04-18-2015, 12:09 PM
Notenoughhp Notenoughhp is offline
Junior Member
 
Join Date: Mar 2015
Posts: 25
Default

Just to let everybody know I took the intake out and followed it. Dumb me its just a overflow hose for the tranny.
Reply With Quote
  #7  
Old 04-18-2015, 03:24 PM
Markspd6's Avatar
Markspd6 Markspd6 is offline
Regional Moderator
 
Join Date: Aug 2011
Location: CYPRESS,CA
Posts: 1,067
Default

Yeah, ive seen this hose too.. It should just be for overflow when you overfill the tranny or it mists out some extra fluid when its hot... Might even be a good way to top of the trans fluid?
__________________
Ralliart/EVO rear fender rolls and tab grinding $100, guaranteed fitment(when possible, you should always do the fitment research first)

minimal partial rolls $60(no tab grinding)

So cal fender roller rental $10 per day(3 day min) with $200 cash deposit. Includes Eastwood fender roller, heat gun and heavyweight carry bag.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 09:45 PM.




Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright (c) 2011 RnD Media LLC