Hello,
First Post! I have a 2011 Ralliart, and had an incident (Some idiot cut me off. He went left while signalling right ended up in a ditch, didn't hit him luckily.) where my drivers side front fender splash shield popped out. All screws have been destroyed or are missing.
I have counted 2 push screws that connect to the front bumper and about 10 - 12 push clips that go around the rest of the shield. I am curious to see if the following are the correct sizes and shape. I would go to a dealership, but the closest one is about 35 km away. Plus they will want to charge me 5 dollars per screw.
Push Screws:
http://www.clipsandfasteners.com/Pro...18951&CartID=1
Push Clips
http://www.ebay.ca/itm/310662833864?...ht_3120wt_1163
Thanks ahead for any help.